Skip to main content
Ch. 6 - Applications of Integration
Briggs - Calculus: Early Transcendentals 3rd Edition
Briggs3rd EditionCalculus: Early TranscendentalsISBN: 9780136847243Not the one you use?Change textbook
All textbooksBriggs 3rd EditionCh. 6 - Applications of IntegrationProblem 6.7.36a
Chapter 6, Problem 6.7.36a

Emptying a cylindrical tank A cylindrical water tank has height 8 m and radius 2m (see figure).
a. If the tank is full of water, how much work is required to pump the water to the level of the top of the tank and out of the tank?
<IMAGE>

Verified step by step guidance
1
Identify the physical setup: The tank is a cylinder with height 8 m and radius 2 m, filled with water. We want to find the work required to pump all the water to the top of the tank and out.
Set up a coordinate system: Let the vertical axis y measure the height from the bottom of the tank (y=0) to the top (y=8). Consider a thin horizontal slice of water at height y with thickness dy.
Calculate the volume of the thin slice: The cross-sectional area of the tank is constant and given by the area of the circle, \(A = \pi \times (2)^2 = 4\pi\). The volume of the slice is \(dV = A \cdot dy = 4\pi \, dy\).
Determine the weight of the slice: The weight is the volume times the density of water times gravity. Let \(\rho\) be the density of water and \(g\) the acceleration due to gravity, so the weight is \(dW = \rho g \cdot dV = \rho g \cdot 4\pi \, dy\).
Calculate the work to pump the slice: The distance the slice must be lifted is from height y to the top at 8 m, so the distance is \((8 - y)\). The work to move this slice is \(dWork = (\text{weight}) \times (\text{distance}) = \rho g \cdot 4\pi (8 - y) \, dy\). Integrate this expression from \(y=0\) to \(y=8\) to find the total work.

Verified video answer for a similar problem:

This video solution was recommended by our tutors as helpful for the problem above.
Video duration:
4m
Was this helpful?

Key Concepts

Here are the essential concepts you must grasp in order to answer the question correctly.

Work Done by a Variable Force

Work is the integral of force over distance. When pumping water from different depths, the force varies with the weight of the water being moved, and the distance changes depending on the water's height. Calculus helps sum these infinitesimal contributions to find total work.
Recommended video:
05:40
Work Done On A Spring (Hooke's Law)

Volume and Cross-Sectional Area of a Cylinder

The volume of water at a certain height in the cylindrical tank is found using the cross-sectional area (πr²) multiplied by the thickness of a water slice (dy). This allows calculation of the weight of each slice, essential for determining the force needed to pump it.
Recommended video:
05:38
Introduction to Cross Sections

Density and Weight of Water

The weight of water is the product of its volume, density, and gravitational acceleration. Knowing the density of water (typically 1000 kg/m³) and gravity (9.8 m/s²) allows conversion from volume to force, which is necessary to compute the work done in pumping.
Recommended video:
09:32
Lifting Problems
Related Practice
Textbook Question

Winding a chain A 30-m-long chain hangs vertically from a cylinder attached to a winch. Assume there is no friction in the system and the chain has a density of 5kg/m.

a. How much work is required to wind the entire chain onto the cylinder using the winch?

Textbook Question

Work in a gravitational field For large distances from the surface of Earth, the gravitational force is given by F(x) = GMm / (x+R)², where G = 6.7×10^−11 N m²/kg² is the gravitational constant, M = 6×10^24 kg is the mass of Earth, m is the mass of the object in the gravitational field, R = 6.378×10⁶ m is the radius of Earth, and x≥0 is the distance above the surface of Earth (in meters).


a. How much work is required to launch a rocket with a mass of 500 kg in a vertical flight path to a height of 2500 km (from Earth’s surface)?

1
views
Textbook Question

Consider the region R in the first quadrant bounded by y=x^1/n and y=x^n, where n>1 is a positive number.


a. Find the volume V(n) of the solid generated when R is revolved about the x-axis. Express your answer in terms of n.

1
views
Textbook Question

21–30. {Use of Tech} Arc length by calculator


a. Write and simplify the integral that gives the arc length of the following curves on the given interval. 

y = x³/3, for −1≤x≤1

Textbook Question

Given the velocity function of an object moving along a line, explain how definite integrals can be used to find the displacement of the object.

Textbook Question

6–8. Let R be the region bounded by the curves y = 2−√x,y=2, and x=4 in the first quadrant.


Suppose the shell method is used to determine the volume of the solid generated by revolving R about the line x=4.


a. What is the radius of a cylindrical shell at a point x in [0, 4]?