Skip to main content
Ch. 6 - Applications of Integration
Briggs - Calculus: Early Transcendentals 3rd Edition
Briggs3rd EditionCalculus: Early TranscendentalsISBN: 9780136847243Not the one you use?Change textbook
All textbooksBriggs 3rd EditionCh. 6 - Applications of IntegrationProblem 6.7.31b
Chapter 6, Problem 6.7.31b

Winding a chain A 30-m-long chain hangs vertically from a cylinder attached to a winch. Assume there is no friction in the system and the chain has a density of 5kg/m.
b. How much work is required to wind the chain onto the cylinder if a 50-kg block is attached to the end of the chain?

Verified step by step guidance
1
Identify the physical setup: A 30-meter chain with linear density 5 kg/m hangs vertically, and a 50-kg block is attached at the bottom. The goal is to find the work required to wind the entire chain and the block onto the cylinder (i.e., lift them up).
Express the weight of the chain per unit length as \(\lambda = 5 \text{ kg/m}\), so the mass of a segment of length \(x\) meters is \(m(x) = 5x\) kg. The weight force of this segment is \(W(x) = 9.8 \times 5x = 49x\) Newtons, where 9.8 m/s² is the acceleration due to gravity.
Set up the integral for the work done to lift the chain: Consider a small segment of the chain at a distance \(x\) from the bottom (where \(x=0\) is the bottom and \(x=30\) is the top). This segment must be lifted a distance of \(x\) meters to be wound onto the cylinder. The infinitesimal work to lift this segment is \(dW = \text{force} \times \text{distance} = 49 \, dx \times x = 49x \, dx\).
Account for the 50-kg block at the bottom: The block has a weight of \(50 \times 9.8 = 490\) Newtons and must be lifted the full 30 meters. The work to lift the block is \(W_{block} = 490 \times 30\).
Write the total work as the sum of the work to lift the chain and the work to lift the block: \(W_{total} = \int_0^{30} 49x \, dx + 490 \times 30\). Evaluate the integral to find the total work required.

Verified video answer for a similar problem:

This video solution was recommended by our tutors as helpful for the problem above.
Video duration:
3m
Was this helpful?

Key Concepts

Here are the essential concepts you must grasp in order to answer the question correctly.

Work Done by a Variable Force

Work is the integral of force over a distance. When the force changes with position, as in lifting parts of a chain, we calculate work by integrating the weight of each segment over the distance it moves. This approach accounts for the varying force needed to lift different lengths of the chain.
Recommended video:
05:40
Work Done On A Spring (Hooke's Law)

Weight and Density Relationship

The weight of an object is the product of its mass and gravitational acceleration. For a chain with uniform density, mass is density times length. Understanding this helps determine the force exerted by the chain at any point, which is essential for calculating the work done in lifting it.
Recommended video:
09:32
Lifting Problems

Superposition of Forces in Work Calculation

When multiple forces act in a system, such as the chain's weight and an attached block, the total work is the sum of work done against each force. This means calculating the work to lift the chain and the block separately, then adding them to find the total work required.
Recommended video:
06:22
Introduction To Work
Related Practice
Textbook Question

Calculating work for different springs Calculate the work required to stretch the following springs 0.4 m from their equilibrium positions. Assume Hooke’s law is obeyed.

b. A spring that requires 2 J of work to be stretched 0.1 m from its equilibrium position

Textbook Question

Two runners At noon (t=0), Alicia starts running along a long straight road at 4 mi/hr. Her velocity decreases according to the function v(t) = 4 / t + 1 for t≥0. At noon, Boris also starts running along the same road with a 2-mi head start on Alicia; his velocity is given by u(t) = 2 / t + 1, for t≥0. Assume t is measured in hours.


b. When, if ever, does Alicia overtake Boris?

Textbook Question

Filling a tank A 2000-liter cistern is empty when water begins flowing into it (at t=0 at a rate (in L/min) given by Q′(t) = 3√t, where t is measured in minutes.


b. Find the function that gives the amount of water in the tank at any time t≥0.

Textbook Question

Let R be the region in the first quadrant bounded above by the curve y=2−x² and bounded below by the line y=x. Suppose the shell method is used to determine the volume of the solid generated by revolving R about the y-axis.

b. What is the height of a cylindrical shell at a point x in [0, 2]?

Textbook Question

"Determine whether the following statements are true and give an explanation or counterexample.


b. The volume of a hemisphere can be computed using the disk method. "

1
views
Textbook Question

21–30. {Use of Tech} Arc length by calculator


b. If necessary, use technology to evaluate or approximate the integral.

y = cos 2x, for 0 ≤ x ≤ π