The density of a gas of unknown molar mass was measured as a function of pressure at 0 C, as in the table that follows. (b) Why is d>P not a constant as a function of pressure?

Verified step by step guidance

Step 1: Observe the graph provided, which shows the relationship between d/P (density divided by pressure) and pressure (P) for a gas at 0°C.

Step 2: Note that the y-axis represents d/P in units of g/(atm·L) and the x-axis represents pressure (P) in units of atm.

Step 3: Identify that the graph shows a non-linear relationship, indicating that d/P is not constant as pressure increases.

Step 4: Understand that according to the ideal gas law (PV = nRT), for an ideal gas, the density (d) should be directly proportional to pressure (P) at constant temperature, making d/P a constant value.

Step 5: Conclude that the deviation from a constant d/P value suggests that the gas does not behave ideally at higher pressures, likely due to intermolecular forces and the finite volume of gas molecules.

Verified video answer for a similar problem:

This video solution was recommended by our tutors as helpful for the problem above.

Video duration:

Was this helpful?

Key Concepts

Here are the essential concepts you must grasp in order to answer the question correctly.

Ideal Gas Law

The Ideal Gas Law (PV=nRT) relates the pressure (P), volume (V), temperature (T), and number of moles (n) of a gas. It assumes that gas particles do not interact and occupy no volume, which is a good approximation under many conditions. Understanding this law is crucial for analyzing gas behavior, especially when considering how density changes with pressure.

Density and Molar Mass Relationship

Density (d) is defined as mass per unit volume (d = m/V). For gases, density can also be expressed in terms of molar mass (M) and the Ideal Gas Law. The relationship shows that density is directly proportional to molar mass and inversely proportional to temperature and pressure, which is essential for understanding why d/P varies with pressure.

Real Gas Behavior

Real gases deviate from ideal behavior at high pressures and low temperatures due to intermolecular forces and the volume occupied by gas particles. This deviation can lead to non-constant relationships between density and pressure, as seen in the provided graph. Recognizing these deviations is important for interpreting experimental data and understanding gas properties under varying conditions.

Recommended video:

Guided course

01:15

Ideal Gas Law Formula

Related Practice

Textbook Question

You have a sample of gas at 0 C. You wish to increase therms speed by a factor of 3. To what temperature shouldthe gas be heated?

Textbook Question

An ideal gas at a pressure of 152 kPa is contained in a bulbof unknown volume. A stopcock is used to connect thisbulb with a previously evacuated bulb that has a volumeof 0.800 L as shown here. When the stopcock is opened,the gas expands into the empty bulb. If the temperatureis held constant during this process and the final pressureis 92.66 kPa, what is the volume of the bulb that wasoriginally filled with gas?

views

Textbook Question

The density of a gas of unknown molar mass was measured as a function of pressure at 0 C, as in the table that follows. (a) Determine a precise molar mass for the gas. [Hint: Graph d>P versus P.]

Textbook Question

An 8.40-g sample of argon and an unknown mass of H2are mixed in a flask at room temperature. The partial pressureof the argon is 44.0 kPa, and that of the hydrogen is57.33 kPa. What is the mass of the hydrogen?